The Crane 3-Lab gimbal supports up to two motors at the same time. The Zhiyun-Tech TransMount Focus & Zoom Servo Combo Kit includes the TransMount Max zoom/focus servo and slightly lighter TransMount Lite focus servo. Together these two motors allow you to control both focus and zoom with zero latency. The motors attach to the bottom of the Crane's baseplate without any tools using just the included brackets, rods, and thumbscrews.
The Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller can be used interchangeably for zoom and focus control on the Crane 3-Lab and WEEBILL LAB gimbals. It has a powerful-enough motor to control zoom, whereas the lighter-weight TransMount Lite is designed for focus control only.
The Crane 3-Lab supports up to two motors at the same time, and it's recommended to use the TransMount Max and TransMount Lite together if requiring both zoom and focus control on the Crane. The WEEBILL, however, supports only one motor, so the TransMount Max is recommended as the only solution because it can be used interchangeably for both functions.
Featuring a toolless design, the TransMount Max attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal's baseplate with the third thumbscrew. Then connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.
The Zhiyun-Tech TransMount Lite Servo Focus Controller is designed specifically for focus control. For zoom control please see the TransMount Max, which has a stronger motor that's capable of handling zoom adjustments.
The TransMount Lite is intended for use with the Crane 3-Lab, although it's also compatible with the WEEBILL LAB. The Crane supports two motors at the same time; ideally, you would use the slightly lighter TransMount Lite for focus control and the optional TransMount Max for zoom control. The WEEBILL LAB, however, supports only one motor, so the better option for it would be the TransMount Max, because it can be used interchangeably between focus and zoom control.
Featuring a toolless design, the TransMount Lite attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal's baseplate with the third thumbscrew. Then connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.
| Interface | USB Type-C |
| Dimensions | 4.8 x 5.4 x 2.6" / 12.2 x 13.6 x 6.5 cm |
| Weight | 11.6 oz / 330 g |
| Package Weight | 0.795 lb |
| Box Dimensions (LxWxH) | 5.3 x 5 x 2.6" |
| Interface | USB Type-C |
| Dimensions | 4.8 x 5.4 x 2.6" / 12.2 x 13.6 x 6.5 cm |
| Weight | 11 oz / 312 g |
| Package Weight | 0.75 lb |
| Box Dimensions (LxWxH) | 5.4 x 5 x 2.5" |
| Manufacturer | Zhiyun |
|---|
