The Ronin 2 Pro Combo with Ready Rig and ProArm Kit, available at the best price in Nepal at Oliz Store, is the most versatile professional 3-axis stabilization system. It features a monocoque carbon fiber frame design and high torque motors that can support cameras weighing up to 30 lbs.
The system offers fine-tune balancing for precision control and includes self-heating, hot-swappable batteries. Additionally, it provides on-board power for the camera and accessories, integrated camera controls, and built-in GPS, and is compatible with the DJI A3 Flight Controller.
Static: 300 mA (at 22.8 V) Dynamic: 500 mA (at 22.8 V) Locked Motor: Up to 15 A (at 22.8 V)
Performance
Payload Capacity
30 lb / 13.6 kg
Precision of Control
± 0.02°
Maximum Controlled Rotation Speed
Pan Axis: 360°/s Tilt Axis: 360°/s Roll Axis: 360°/s
Controlled Rotation Range
Pan Axis Control: 360° continuous rotation Tilt Axis Control: ±135° Roll Axis Control: ±30°
Gimbal Controller
CPU
32-bit ARM processor
Sensors
Independent IMU module Temperature sensors
Positioning
GPS
Operation Modes
Underslung Upright Briefcase
Interface
Built-in touch panel
Receiver
Frequency
2.4 GHz / 5.8 GHz switchable
Connectivity
Wireless
Bluetooth 4.0
Wired
1 x D-Bus 1 x USB Type-C
Accessory Power Ports
4 x 14.4 V camera cage (combined 8 A) 2 x 12.6 V pan motor (combined 4 A) 1 x 12.6 V D-Tap (8 A)
System Requirements
Assistant Software
Windows 7 or above macOS 10.11 or above iOS 9 or above Android 4.4 or above
General
Camera Tray Dimensions
Maximum Depth from Center of Gravity on Baseplate: 9.6" / 245 mm Maximum Height Measured from Top of Baseplate: 6.5" / 165 mm Maximum Width: 7.1" / 180 mm
Mounting Compatibility
Handheld Car mount Aerial Tripod Steadicam
Note: Separately available mounting hardware may be required.
Operating Temperature
-4 to 122°F / -20 to 50°C
Dimensions (W x D x H)
Including Handle Bar: 24.8 x 16.4 x 28.3" / 630 x 416 x 720 mm Excluding Handle Bar: 13.8 x 16.4 x 20.9" / 350 x 416 x 530 mm
Weight
Including Handle Bar: 14 lb / 6.4 kg Excluding Handle Bar: 11 lb / 5.0 kg
Packaging Info
Package Weight
25.05 lb
Box Dimensions (LxWxH)
29.5 x 27.5 x 8.75"
IN THE BOX
Ronin 2 Gimbal ×1 Ronin 2 Power Hub (w/ Camera Control Module) ×1 Camera Dovetail Plate ×1 Camera Top Cross Bar ×1 Remote Controller (w/ Neckstrap) ×1 TB50 Battery Mount ×1 Intelligent Battery (TB50) ×2 Battery Charger ×1 Battery Charger Power Cable ×1 Quad Charging Hub ×1 Grip (w/ Fold-away Feet and Top Mounting Block) ×1 Accessories Package (Screws & Hex Tool) ×1 Cables Package (Red Power Cable, Arri Alexa Mini Power Cable, CANBUS to 2-pin Power Cable, CANBUS to 5.5mm Power Cable, Triple P-tap Breakout Box, USB Type-C Data Cable, RED RCP Control Cable, Arri Alexa Mini Start/Stop Cable, SDI IN Cable, SDI OUT Cable, Remote Battery Mounting Cable, UART to D-BUS Cable, 1 each.) ×1 Quick Start Guide ×1 Monitor Mounting Bracket ×1 15mm Rod Mount ×1 15mm Rod ×2 Ronin 2 Universal Mount ×1 Water Tight Protective Case ×1 Ronin 2 MotionBlock ×1 Ready Rig Frame x1 Shoulder mounts x2 ProArm Carbon Fiber Support Rods x2 Rear Tension Cables x2 Universal Gimbal Attachments x2 Ready Rig GS Bag x1
