Ronin 2 Pro Combo with Ready Rig and ProArm Kit

Ronin 2 Pro Combo with Ready Rig and ProArm Kit

DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer Professional Combo

DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer Professional Combo

Ronin 2 Pro Combo with Ready Rig and ProArm Kit

  • Most versatile professional 3-axis stabilization system
  • Monocoque carbon fiber frame design
  • High torque motors supporting cameras up to 30 lbs
  • Fine tune balancing for precision control
  • Self-heating hot swappable batteries
  • On board power for camera and accessories
  • Integrated camera controls
  • Built-in GPS & compatible with DJI A3 Flight Controller
Rs1,120,000.00
In stock
SKU
Ronin 2 Pro Combo with Ready Rig and ProArm Kit
**Price is inclusive of VAT**

DJI Ronin 2 Specs

Electrical and Mechanical
Working Current Static: 300 mA (at 22.8 V)
Dynamic: 500 mA (at 22.8 V)
Locked Motor: Up to 15 A (at 22.8 V)
Performance
Payload Capacity 30 lb / 13.6 kg
Precision of Control ± 0.02°
Maximum Controlled Rotation Speed Pan Axis: 360°/s
Tilt Axis: 360°/s
Roll Axis: 360°/s
Controlled Rotation Range Pan Axis Control: 360° continuous rotation
Tilt Axis Control: ±135°
Roll Axis Control: ±30°
Gimbal Controller
CPU 32-bit ARM processor
Sensors Independent IMU module
Temperature sensors
Positioning GPS
Operation Modes Underslung
Upright
Briefcase
Interface Built-in touch panel
Receiver
Frequency 2.4 GHz / 5.8 GHz switchable
Connectivity
Wireless Bluetooth 4.0
Wired 1 x D-Bus
1 x USB Type-C
Accessory Power Ports 4 x 14.4 V camera cage (combined 8 A)
2 x 12.6 V pan motor (combined 4 A)
1 x 12.6 V D-Tap (8 A)
System Requirements
Assistant Software Windows 7 or above
macOS 10.11 or above
iOS 9 or above
Android 4.4 or above
General
Camera Tray Dimensions Maximum Depth from Center of Gravity on Baseplate: 9.6" / 245 mm
Maximum Height Measured from Top of Baseplate: 6.5" / 165 mm
Maximum Width: 7.1" / 180 mm
Mounting Compatibility Handheld
Car mount
Aerial
Tripod
Steadicam

Note: Separately available mounting hardware may be required.
Operating Temperature -4 to 122°F / -20 to 50°C
Dimensions (W x D x H) Including Handle Bar: 24.8 x 16.4 x 28.3" / 630 x 416 x 720 mm
Excluding Handle Bar: 13.8 x 16.4 x 20.9" / 350 x 416 x 530 mm
Weight Including Handle Bar: 14 lb / 6.4 kg
Excluding Handle Bar: 11 lb / 5.0 kg
Packaging Info
Package Weight 25.05 lb
Box Dimensions (LxWxH) 29.5 x 27.5 x 8.75"
IN THE BOX

Ronin 2 Gimbal ×1
Ronin 2 Power Hub (w/ Camera Control Module) ×1
Camera Dovetail Plate ×1
Camera Top Cross Bar ×1
Remote Controller (w/ Neckstrap) ×1
TB50 Battery Mount ×1
Intelligent Battery (TB50) ×2
Battery Charger ×1
Battery Charger Power Cable ×1
Quad Charging Hub ×1
Grip (w/ Fold-away Feet and Top Mounting Block) ×1
Accessories Package (Screws & Hex Tool) ×1
Cables Package (Red Power Cable, Arri Alexa Mini Power Cable, CANBUS to 2-pin Power Cable, CANBUS to 5.5mm Power Cable, Triple P-tap Breakout Box, USB Type-C Data Cable, RED RCP Control Cable, Arri Alexa Mini Start/Stop Cable, SDI IN Cable, SDI OUT Cable, Remote Battery Mounting Cable, UART to D-BUS Cable, 1 each.) ×1
Quick Start Guide ×1
Monitor Mounting Bracket ×1
15mm Rod Mount ×1
15mm Rod ×2
Ronin 2 Universal Mount ×1
Water Tight Protective Case ×1
Ronin 2 MotionBlock ×1
Ready Rig Frame x1
Shoulder mounts x2
ProArm Carbon Fiber Support Rods x2
Rear Tension Cables x2
Universal Gimbal Attachments x2
Ready Rig GS Bag x1
Write Your Own Review
You're reviewing:Ronin 2 Pro Combo with Ready Rig and ProArm Kit